You can design flex circuits in EasyEDA but JLCPCB cannot fab them. Also, EasyEDA does not support blind or buried vias which are often used in flex circuits. As for recreating PCBs from any form of image, this topic has been discussed in depth many times on the forum. Please see my reply to: [https://easyeda.com/forum/topic/Copying-an-existing-board-shape-f9239583761e46b689b851d840503098](https://easyeda.com/forum/topic/Copying-an-existing-board-shape-f9239583761e46b689b851d840503098) and: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)

Thank you for reply. What Company and Software you recommend? Is there some where I can make this and the gerber file more easier? I want a couple with no components at all which should be easy, well looks easy lol. I cant seem to work that auto track out eaither. Im using  PIC16F1788-I/ML in with the exact resistors that are on the board but I cant connect them up. Many Thanks.

To get up to speed with EasyEDA, please read: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f)

Thanks, Links are helping me learn but not amswering my questions. Is there a way to edit a imported image and use the tracks off the imported image and start from there? Or cut parts of the image out to leave the tracks remaining? Then edit shape of board? I understand this place and the fabricators are mainly for board pcbs but Im sure if I create my pcb here, I can convert and use the files in another programe or with a fabricator? I have alot of questions but I will learn most. Just trying to think of easier way to get my corcuit built or the files put together for the layers. Thanks.

Excuse the spelling mistakes. I can not see a edit button.

"Is there a way to edit a imported image and use the tracks off the imported image and start from there?" This question has already been answered. Basically, the answer is no. Please see my reply to: [https://easyeda.com/forum/topic/Copying-an-existing-board-shape-f9239583761e46b689b851d840503098](https://easyeda.com/forum/topic/Copying-an-existing-board-shape-f9239583761e46b689b851d840503098) If you create a PCB in EasyEDA, you are free to generate and download the Gerbers and have them used by any PCB fab house to make your PCB. You do not have to use JLCPCB. This and many other questions are answered by reading: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f)