Hi Andy ! Thanks for answer\. Yes that\`s the problem the \`G \` \(Gerber logo\) that you show \- disapears when trying to convert\, after the message \`save file\`\-when trying to save the file\, \-logo disapears\. I\`ve done this earlier\, then no problems\, produced PCB\`s earlier\. There are now some issues that I can\`t see or the reason for it to happend\. \(?\)\. Rixy

Please post an animated gif to show this behaviour. You can install a copy of ScreentToGif to for this. [https://www.microsoft.com/en-us/p/screentogif/9n3sqk8pds8g?activetab=pivot:overviewtab](https://www.microsoft.com/en-us/p/screentogif/9n3sqk8pds8g?activetab=pivot:overviewtab)

Please try to reset the menu setting 

Hi Tried to reset the menu settings, but it seems that nothing is happening. The Gerber logo is still missing in the tool menu and the document folder on the left-hand side. Tried to log out and log in again, still the same. There must be somekind of conflict issues, or somthing that I can`t see. Is there any new or special updates that must be done ?. Rixy

Please check whether if you have saved PCB module not PCB? PCB module doesn't have Generate Gerber icon. you can create a new PCB to check. if new PCB still not show Gerber icon, please close editor and remove browser cache.