@miguelwon, You can defined a list: **Setting > System Settings > Track Width Setting**  Editing the value in either column automatically changes the value in the other.

Ok, thanks @andyfierman! That's what I was looking for! Btw, is it possible to change the grid size, again like in kicad, to have higher or lower resolution while routing?

And how can we do the same size selection for vias?

@[andyfierman](https://easyeda.com/andyfierman), the width feature does not work if we rout from a pad. To replicate: shift+w to select width -> select width -> click pad to start routing. For some reason, it starts a track of a width of the default size.

Hi! Select nothing and then you can change grid size:  There is also routing width, angles, conflicts, loops and zones below the grid options. Regards, Markus Virtanen HW / Electronics Designer

@miguelwon, "the width feature does not work if we rout from a pad. To replicate: shift+w to select width -> select width -> click pad to start routing. For some reason, it starts a track of a width of the default size." Please refer to the Tutorial: [https://docs.easyeda.com/en/PCB/Route/index.html#Some-Tips-about-Track](https://docs.easyeda.com/en/PCB/Route/index.html#Some-Tips-about-Track):