Hi
Please does anyone know if there's been any community support added for the Lolin D1 Mini V4.0.0 (like this) ?
I've searched for a while but cannot find it.
Thanks
Hi
Please does anyone know if there's been any community support added for the Lolin D1 Mini V4.0.0 (like this) ?
I've searched for a while but cannot find it.
Thanks
Hmmmm,
Looks like you may have to build your own symbol, footprint schematic module or PCB module.
I can't find proper datasheet with dimensions on it so you may have to base it on:
https://easyeda.com/editor#id=!562d77a546a24e4f83c78207be689c00|!5e8b0590e54343728ec9ef915ee13812
https://img.jlc.com//pdf/applyPasteComponent/2021-05-28/701891G/4a5f3d7375be42cf8ff787d5d0ef922d/mini_D1_PRO.pdf
It may help you to read (2.3) in (2) in:
Thanks for the prompt reply. Actually, it looks like the first result from the search that you suggested should do. I've renamed the pin names in the footprint editor and printed out a sample board. As you can see, it's an almost perfect fit. Unless I'm missing something ?
@netdudeuk,
If you're only using it as a footprint for connector placement on another board then that should be OK as you're probably not bothered about the different type of USB socket and the additional I2C connector.
I should have thought: if it's backwards compatible with the earlier versions of the Wemos D1 then the connector placements and the outline should be the same anyway.
Search for Wemos D1 and look under symbols, footprints and both schematic and PCB Modules.