Rotation of schematic symbols by other than 90 degree steps is not supported. Rotating a schematic symbol by any angle that is not a multiple of 90 degree will put the symbol's pins off grid. If you need a symbol at 45 degrees, such as a bridge rectifier, then there has to be a dedicated symbol, with the pins on-grid. So we just made you a part: Search for: `RHRG30120_45deg` in: `More Libraries` To rotate PCB parts, see: https://easyeda.com/forum/topic/Rotation-4qkevN5nF :)

Thank you. I see that RURG was added to the lib, however when I try to paste it the RHRG30120 is being placed. How can I make sure this is added correctly?

Sorry: my mistake. Fixed now. :)