Hi You  can find it at "Libraries" or create a new one. If you can't find the components at "Libraries", then you can create it by yourself base on the datasheet. [https://docs.easyeda.com/en/SchematicLib/SchLib-Create/index.html](https://docs.easyeda.com/en/SchematicLib/SchLib-Create/index.html) [https://docs.easyeda.com/en/PCBLib/PCBLib-Create/index.html](https://docs.easyeda.com/en/PCBLib/PCBLib-Create/index.html) [https://docs.easyeda.com/en/Schematic/Footprint-Manager/index.html](https://docs.easyeda.com/en/Schematic/Footprint-Manager/index.html)

@UserSupport Thanks a lot. I just want to make sure if this is intends to skip this one in the library, as this is a simple component, and there exists for 1x2,1x4,1x.., just miss 1x3. If this does not exists in the standard list, I will try to build one, it's good to learn building component from a simple one like this.

@Super169, You can find some hints on how to make properly documented Schematic Symbols and PCB footprints in my two comments here: [https://easyeda.com/forum/topic/Part-used-is-not-found-so-I-want-to-edit-a-part-so-it-can-be-mine-how-do-I-do-that-80f71b52df2e4cb89affd38a765ba78d](https://easyeda.com/forum/topic/Part-used-is-not-found-so-I-want-to-edit-a-part-so-it-can-be-mine-how-do-I-do-that-80f71b52df2e4cb89affd38a765ba78d)

Just added: Header-Female-2.54_1x3 You'll have to use the Shift+F search to find it as it is not in the EELibs list. :)

@andyfierman Thanks a lot.  I can find it now.