This will help: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f) Especially (4), (5) and (6). Check the Design Manager: tou have a lot of track to pad DRC errors. You have some tacks that should (I guess) be +5V but they have automatically assigned netnames so they show as DRC errors. You also have a problem with the board outline surrounding what is called PCB1. EasyEDA does not allow board outlines within the overall board outline. I don't know what PCB1 represents or how the PCB footprint was created but the way it is done is wrong. You need to search for - and replace your PCB1 with - a suitable PCB module: 

I also note that you have created this PCB directly without creating a schematic first. It is all much easier and less error prone if you follow the Design Flow in the Tutorial: [https://docs.easyeda.com/en/Introduction/Design-Flow-by-Using-EasyEDA/index.html](https://docs.easyeda.com/en/Introduction/Design-Flow-by-Using-EasyEDA/index.html) :)

Thank you for the response and your knowledge, I do have a schematic and have sense fixed some stuff but I cloned the project before sharing it. Thank you for helping me!