You need to use EasyEDA editor to create some projects before publishing
Please make JLCPCB components catalogue sortable and searchable like LCSC parts lists
1278 5
andyfierman 4 years ago
I have been trying to help answer this post: [https://easyeda.com/forum/topic/bc547-equivalent-3d3143a18cd6478fae13dc0b16ef1112](https://easyeda.com/forum/topic/bc547-equivalent-3d3143a18cd6478fae13dc0b16ef1112) where a user has a circuit with a through-hole BC547 transistor in it and they want to find a suitable SMT part that JLCPCB can supply. To properly find an equivalent, the minimum parameters of (i) max collector voltage and (ii) max collector current **must** be available to search on. Without that information it is just a guessing game or random searching. It is impossible to find an equivalent in your parts list because the JLCPCB parts list: [https://jlcpcb.com/parts/componentSearch?secondSortUuid=65bdd51e95f94772bab043e587d091aa&name=Transistors%20(NPN/PNP)&firstSortUuid=6cb8980d2f8d498ba2169b6aedbeaafc](https://jlcpcb.com/parts/componentSearch?secondSortUuid=65bdd51e95f94772bab043e587d091aa&name=Transistors%20%28NPN%2FPNP%29&firstSortUuid=6cb8980d2f8d498ba2169b6aedbeaafc) is just a list of part numbers with minimal - or in many cases no - device specification information and no way to sort by parameters. Searching for part in the LCSC.com is a lot easier because it does have at least voltage and current ratings to sort on. Downloading the .xlsx list is no help because it has no more information than on the web page. The only thing it helps with is that it is faster to search for a part to see if it is in the list or not. In some ways it is even less helpful because it is just one long list of all your parts. It could at least be split into separate sheets for different part categories. To demonstrate my point, these are the minimal parameters of a BC547 from this datasheet:  [https://www.onsemi.com/pub/Collateral/BC550-D.pdf](https://www.onsemi.com/pub/Collateral/BC550-D.pdf) Vcbo = 50V Vceo = 45V Icmax = 100mA Searching the .xlsx list on 50V returns not a single transistor. Searching the online list returns 1194 items with no way to sort the results. Searching the .xlsx list on 45V returns not a single transistor. Searching the online list returns 223 items with no way to sort the results. Searching the .xlsx list on 100mA returns not a single transistor. Searching the online list returns 761 items with no way to sort the results. Searching online for transistor type NPN 100ma 50V is a little more helpful but it still returns over 100 items. Worse still, these results are a mix of NPN and PNP transistors because many of the bipolar transistors appear to be listed like this: TRANSISTORS (NPN/PNP) NPN ... which is not helpful at all. Why is the JLCPCB list not just the same list as LCSC.com but with an extra column saying "AVAILABLE FOR SMD ASSEMBLY AT JLCPCB."? Then EasyEDA/LCSC/JLCPCB only has to maintain one, central list and users only have to go to one place that is already pretty well integrated with EasyEDA. **_Come on people: we can and must do better than this! _** **_:)_**
Comments
cjohnson 4 years ago
This is 100% needed. Trying to find components on LCSC that are: 1\. In EasyEDA's library 2\. JLCPCB Assembled compatible Is so difficult, because you have to go on LCSC, find the part, then copy paste part numbers until you finally find that one that is compatible. Being able to do it all from EasyEDA is a must.
Reply
JLCPCBsupport 4 years ago
Thanks for your good advice JLCPCB ,easyeda and lcsc are family sites ,but three websites operation are independent and are not fully integrated. Now jlcpcb has 30k+SMD parts in stocks , and lcsc has 110k+ . By contrast, jlcpcb's stocks are not enough ,currently we only supports componets from our library . In the future ,JLCPCB's smt service will support all parts from Lcsc's components and we will improve further to integrate well lcsc and easyeda . Thanks !
Reply
cjohnson 4 years ago
@JLCPCBsupport In the short term it would be great if LCSC's site had a filter for "JLCPCB Assembled." The main issue is when you go to the assembled process and have to search for the right parts, which in my case, has led to issues.
Reply
Kaisha 4 years ago
I concur.  I love the SMT service, but finding parts can be a PITA at the moment.
Reply
milordy 4 years ago
I agree, we can often use alternative parts, only it is very complicated to research, it takes a lot of time.
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice