I ordered a PCB from EasyEDA in late 2016. The project is here: https://easyeda.com/TyeEasyEDA/Boomerang_Keyboard-a2d4e41a4fbf4da490f883c4b93fd55c . As you can see, it has a large number of internal square cutouts for small RGB LEDs. The footprint for these LEDs was tested by another user who received samples that were perfect. His LEDs fit the square cutout perfectly and the internal radius was very sharp and tight. When I received my PCB, the LEDs do not fit without extensive filing because the corners are too rounded. Before I order v2.0, is there a way to designate a smaller drill bit or radius like the original samples had?