Hello ; This could be a temporary action from our logistics team, please send an Email to [herry@jlcpcb.com](mailto:herry@jlcpcb.com) to get the exact details about the part, kindly refer to the part using its part# which is C32843 Thank you.

Thanks. I have done so.  I will post any good news here.

Only problem is the email address you provided doesn't appear to exist

That should be: [sherry@jlcpcb.com](mailto:sherry@jlcpcb.com)<br> <br> :)

@andyfierman @philipbarr1 Oh my bad sorry, it is [henry@jlcpcb.com](mailto:henry@jlcpcb.com) :)

Any update ?

Hi It removed SMT now in easyeda @mike.hoffs

Why is it removed ? We also made designs based on that chip and would like to see it back.

Its back, and in stock again !

Sill unable to use W5500 for SMT service. Any updates?

@JLCPCBsupport, @UserSupport, @p.sdrshn, Please study the screenshot below.  The **JLCPCB** library tab shows the W5500 to be in stock but then says "Doesn't support JLCPCB SMT Service." This seems to be true because searching: [https://jlcpcb.com/parts/](https://jlcpcb.com/parts/)<br> <br> for W5500 gives: No Result Found But if this part is not supported for the JLCPCB SMT Service, why is it listed in the JLCPCB library? If it is not supported for the JLCPCB SMT Service then surely it should only appear in the LCSC Library? This is very confusing for our users.

@p.sdrshn The Parts available for assembly are those parts visible in in our JLCPCB parts library that you can check through this link : [https://jlcpcb.com/parts](https://jlcpcb.com/parts) The "W5500" is not supported for assembly and it is already mention by the EDA side but you are right, it shouldn't appear in "JLCPCB Assembled" classes so @UserSupport please proceed to the appropriate corrections. With thanks

@andyfierman @JLCPCBsupport That is the JLCPCB part on sale and off sale changes can not sync with EasyEDA in time, we will solve this issue soon.