AFAIK, EasyEDA does not currently support export - or conversion of Gerber files - to stl or gcode at present. [https://easyeda.com/Doc/Tutorial/Export.htm#Exporting-Fabrication-Files](https://easyeda.com/Doc/Tutorial/Export.htm#Exporting-Fabrication-Files) describes how to download Gerbers. You will therefore need some other software to do that. Here are some free/FOSS options: [https://www\.cnctoolsworld\.com/application\-all\_to\_g\_code\_converter\_free\-2\.html](https://www.cnctoolsworld.com/application-all_to_g_code_converter_free-2.html) [http://replicat.org/generators](http://replicat.org/generators) A search for "gerber to gcode converter" will turn up more.

Than you for your suggestions. Flatcam does everything I wanted. After exporting gerbers from EasyEDA they can be opened in Flatcam, and then Flatcam can produce gcode which can be used by 3dprinter with sharpie attached to it, to draw the pcb.

@witor Did you have to draw some extra geometry in flatcam? My design has holes, which are not part of the gerber files. Do you know if flatcam can also automatically add holes?

Answering my own question The holes can be imported in flatcam using: File > Open Excellon then select the .DRL files.