Hi, > I don't know what exactly but photo view is showing purple board without any traces, just some top silk layer is visible. You maybe hide the top layer in the PCB Layer tool. ![enter image description here][1] >there is no drc errors but I'm not sure it will affect PCB when i will order one Photoview is just for check, will not affect PCB order, you can use some gerber view to check the gerber files. If you order from EasyEDA, We will check the gerber for you. I have a question from you, Are you sure the imgur picture is purple? It is pink, EasyEDA has not such color. [1]: /editor/20151004/561073098edb5.png

Yes picture is definitelly purple, not pink. All layers are enabled, that was the first thing I've checked. Another thing wrong I've noticed is copper area. Top layer has GND copper area but gerber files are showing normal traces for GND. Before I made a mess i could see copper area in photoview and gerbers. That happened to me before when I was creating previous pcb but just made it again from scratch to fix it. Not really want to do it again..

Hi My GOD, The whole team stop the normal job try to find what is the problem, we are sure we have find the problem. You made a small mistake, but caused the big problem. You should use `copper Area` tool not `solid region` in the PCB tool. Please check https://easyeda.com/Doc/Tutorial/PCB.htm#CopperArea and https://easyeda.com/Doc/Tutorial/PCB.htm#SolidRegioninPCB out ![enter image description here][1] ![enter image description here][2] [1]: /editor/20151005/5611c61be849b.png [2]: /editor/20151005/5611c56de8594.png

It is copper area for GND. Rebuilted it few times with no result. Anyway, This morning removed all copper area and left traces as before and problem is still here. I will have to make pcb from scratch again i think

Can you share your project to support@easyeda.com private via https://easyeda.com/Doc/Tutorial/share.htm#AccessControl ? We will check this out in few minutes if you would like to share.

If you have shared, please let me know.