* Please do not double post. It has already been suggested that you read (3) in (2) in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a) Paying particular attention to [https://docs\.google\.com/document/u/1/d/1OWZVVFRAe\_2NW3WratpkA\_SGuHa5AcRow5ZRfvcoVTU/pub\#h\.t46gvvi8zole](https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.t46gvvi8zole) Please also note that your use of the Bus Entry/Exit symbol on your supply and ground nets does not work because you have not applied any net labels. Click on any of the supply nets then press the H key and you will see that they are not all connected together. Similarly your ground nets are not connected together.  You can also see this in the Design Manager. Please see: [https://easyeda\.com/andyfierman/bus\_across\_2\_schematics\-64e86b65e3bd4e35afcc7f0e51f46d73](https://easyeda.com/andyfierman/bus_across_2_schematics-64e86b65e3bd4e35afcc7f0e51f46d73)