Forum - EasyEDA - An Easier Electronic Circuit Design Experience

Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss

Schematic PCB Simulation Skill Extension Feature Requests Bug Reports

Annotate over multiple schematics not working

1207 8

alan.green 7 years ago

**BUG** Concise problem statement: Steps to reproduce bug: 1. Open both schematics from project [DirSpk1b2][1] 2. Select Annotate... from menu with "All Opened Schematics" and "Re-annotate All" ![Annotate options as described][2] 3. Select "Annotate" Results: 1. the schematic I am currently looking at has been renumbered, but the other one has not 2. neither schematic is marked as requiring a save ![No "asterix" on tabs][3] 3. the Convert to PCB function gives errors because multiple items have the same ID: ![enter image description here][4] Expected results: 1. both schematics should be renumbered 2. both schematics should be marked as requiring a save 3. the Convert to PCB function should not give errors Browser: Chrome Version 50.0.2661.102 m. EasyEDA Version 3.5.1 [1]: https://easyeda.com/alan.green/DirSpk1b2-bPlfxrI0i [2]: /editor/20160515/5737cc4c30807.png [3]: /editor/20160515/5737ccfa14f09.png [4]: /editor/20160515/5737ce1a4ca1e.png

Comments

alan.green 7 years ago

Also, the order of the resulting annotations is quite unpredictable. ![enter image description here][1] [1]: /editor/20160515/5737d95b0b116.png

andyfierman 7 years ago

What happens if you press `Reset` first (which should reset all numering to `?`) and then reannotate?

support 7 years ago

Yes, It will be fixed soon. We hope you to use https://easyeda.com/Doc/Tutorial/schematic.htm#Prefix-Start for your next project.

alan.green 7 years ago

If I select "All opened schematics", then reset, then Annotate, both schematics are annotated in a sensible order, however, they still share component names - for example, there is one R1 on each schematic. If you'd like to try it out yourself, I put a multi-schematic version of the project here: https://easyeda.com/alan.green/Multi_schematic_Annotate_Issue-trkCwO6oi

alan.green 7 years ago

Support: thank you! That's a good hint and when I use prefix start, the numbering works OK.

support 7 years ago

@Alan.Green We confirmed this is a bug. because we like the prefix start feature and forget to test the annotation :) It will be fix soon. BTW DirSpk1 supper nice, hope you can add more description or link EasyEDA at your https://hackaday.io/project/9085-ultrasonic-directional-speaker-v1 :)

eric 7 years ago

It's fixed at v3.5.3 Please reload the page to the latest version. If it works still incorrectly, please contact us. Thanks for your report.

alan.green 7 years ago

Yes! That seems to be working now. Thank you for the quick fix!!

你现在访问的是EasyEDA海外版，使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice

Unleash creativity, start design now.

Cookie Notice