Hi all I've run into a problem with the autorouter.  I'm using a local installation of the autorouter (running onWindows 10) and when running the autorouter in local mode (or Cloud) it appears to be hanging.  However, when I look at the autorouter log file, I can see that it stops as soon as it starts, writing only the following messages. \-\-\-\-\-\-\-\-\-\-\-\-\-Connection established\-\-\-\-\-\-\-\-\-\-\- Start routing... Routing \-\-\-\-\-\-\-\-\-\-\-\-\-Connection closed\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- At the beginning the auto router worked perfectly fine, but after some changes it suddenly stopped. Unfortunately I cannot pin it to a component. I already tried the suggestions given in Readme.txt and [EasyEDA Tutorial](https://docs.easyeda.com/en/PCB/Route/index.html#Local-Auto-Router) - as far as I understand them - but it didn't work. My project can be found at [https://oshwlab.com/chruetli/rs-422-usb-switch_copy](https://oshwlab.com/chruetli/rs-422-usb-switch_copy)