Hi,
1. Maybe the server is busy.
2. Maybe you need to change the router rule, if your footprint's pad is too complex, there is no way to route with a big track, try to set the track as small as you can.
3 Some time, You must use manually router for some boards.
Hi Dillon,
I have similar issue with a very simple case![my simple schematic][1]
When I go to PCB view and after I place the components inside the PCB area as below:
![my simple pcb][2]
And I click on autoroute, the autorouter stops at 98% (timeout) and no track is routed.
Do you have a working schematic example to share? Maybe I misuse the tool?
Thanks and BR,
Pierre-Yves
[1]: /editor/20160329/56fa71ebc0b80.jpg
[2]: /editor/20160329/56fa725d779dd.jpg
Hi,
This is because you don't set the auto router config right.
The pad 2 pad is very close for your package, so you need to adjust it. BTW it seems the package is not right.
EasyEDA's auto router is powerful, you can try this PCB https://easyeda.com/berhoyt/Treshna_Pi_Hat-8u0iAtL3l
You need to know every param, and set the right value.
![enter image description here][1]
[1]: /editor/20160329/56fa75b843f25.png
Hi Dillon,
I managed to make autorouter now, after modfifying the DRC and auto-router settings to match my needs.
I have appreciated the quick feedback!
Thanks a lot and BR,
Pierre-Yves
Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice
Brand new interactions and interfaces. 
Easy to use and quick to get started. 