Hello,
I'm trying to create multiple sub-PCBs with complex forms on one PCB. Therefore, I used an external CAD program to create the board outlines.
While importing the DXF file, I placed it on the board outline layer. Is this the correct proceeding to also create board cutouts (see picture)? Please notice that the cutouts are not completed yet.
![Cutouts_2.png](//image.easyeda.com/pullimage/11L6ao5z9yQAoVj4aTuXIqWDziy6AnZWd6T4WHPs.png)
In other forum topics, I have read that the paths should be converted to NPTH paths. Unfortunately, I can only convert one shape at a time to NPTH, which is quite time consuming. Also, after rendering the Board in the 3D viewer, the converted paths do not look right to me:
![3DView.png](//image.easyeda.com/pullimage/CRzPb0ZCL8oVGLwHI7uOHqHZ7f74Wlb4gyZhVPoJ.png)
I only converted the most left cutout to NPTH, all other cutouts are made in the board outline layer.
Can you help me with that?
Thanks very much,
Simon