**BUG** Concise problem statement: Outline of bottom layer flood remains visible, drawn *and* selectable **above** top layer, even when TopLayer is selected in **Layers** toolbar. Steps to reproduce bug: 1) Draw an outline for a top layer flood. 2) Copy outline. 3) Paste outline onto top layer. 4) Change outline to bottom layer: 5) Properties > CopperArea Properties > Layer. 6) Solid Fill bottom layer flood. 7) Switch to TopLayer in **Layers** toolbar. 8) Solid Fill top layer flood. Results: i) Outline of top layer flood remains visible as dashed line. ii) Outline of bottom layer flood remains visible as dashed line. iii) Outline of bottom layer flood remains visible, drawn *and* selectable **above** top layer. Expected results: i) After filling, outlines of floods should be drawn as sharp edges (through the centre of the dashes of original dashed lines?) ii) Floods and/or flood outlines should move up and down consistent with Layers selection. A lower layer should not be drawn above a higher layer if the higher layer has been selected in the **Layers** toolbar. Url: http://i.imgur.com/Hgtn5Be.png `https://easyeda.com/file_view_Astable-Multivibrator_9lfxP7pHB.htm` Browser:Mozilla/5.0 (Windows NT 5.1; rv:24.0) Gecko/20100101 Firefox/24.0