Hey all, Im currently working on a project for the holidays for my family and I need kinda alot of help fixing my DRC Errors and just a check to make sure my joystick will actually work lol... _Thanks for all help_ [https://easyeda.com/ryejoseph418/gbzeropsp1000](https://easyeda.com/ryejoseph418/gbzeropsp1000) this is my project folder just fyi I rotated the joystick to the right to fit on pcb because theres a hole blocking it from being perfectly centered in that area. since rotating it changes y to x. I decided to just rename them to the correct new axes and wire them to their new slots on the hdpin holder. Will this cause any problems? Also my errors are: Track to Pad Track to Track Pad to Pad the template I was using to base my design off of also had these errors so Im not entirely sure on how to fix :( Ive done some research but I figured to just get a better person to take a look at it and stop stressing Im a bit way over my head with this one but itll be just so amazing to actually get this working. itll blow my fams mind :)))) _Thanks again for help_