Does the component value matter or you just need the footprint? I couldn't find a 1MOhm Pot in LCSC with that footprint, and going through the user libs isn't something I want to do now at 2am, but there was a post recently about a similar component. If you already have the component at hand or are buying from that store, then you could use this. This one has the 5mm between pins 1 and 3. [https://lcsc\.com/product\-detail/Potentiometers\-Variable\-Resistors\_ALPS\-Electric\-RK09K1130AU2\_C388855\.html](https://lcsc.com/product-detail/Potentiometers-Variable-Resistors_ALPS-Electric-RK09K1130AU2_C388855.html) LCSC Part # C388855 Maybe that helps you!

Comparing the datasheets of the two parts, [https://www.taydaelectronics.com/potentiometer-variable-resistors/rotary-potentiometer/linear/1m-ohm-linear-taper-potentiometer-round-knurled-plastic-shaft-pcb-9mm.html](https://www.taydaelectronics.com/potentiometer-variable-resistors/rotary-potentiometer/linear/1m-ohm-linear-taper-potentiometer-round-knurled-plastic-shaft-pcb-9mm.html) will fit OK using the footprint of: [https://lcsc\.com/product\-detail/Potentiometers\-Variable\-Resistors\_ALPS\-Electric\-RK09K1130AU2\_C388855\.html](https://lcsc.com/product-detail/Potentiometers-Variable-Resistors_ALPS-Electric-RK09K1130AU2_C388855.html) which is:  in the EasyEDA Search Libraries tool.

I need the footprint. Thanks guys, those options works for me. I appreciated it.