This is my first PCB design. I have limited electronics experience so here goes.
The PCB is almost exactly how I want it to me except power is not connected in all the correct places i.e. with reference to the attached PNG I want to move the lines currently going into the connector circled in green to where the green arrow points but I cannot get this right.
![PCB.png](//image.easyeda.com/pullimage/3vTBIpAGeXs54nUCLNfdzI5ssuR5pWh2Cyr3EYJN.png)
My project can be found [here](https://easyeda.com/abasel/marshmellow-roaster)
All good, I got it sorted. I had left out some detail.
Firefox
62.0
Linux
EasyEDA
5.7.26