I plan on having EasyEDA fabricate this board when I'm done designing it. After looking through a couple of other posts about rectangular pads I'm still not confident that I did it correctly and that EasyEDA can do this. You can see my project here (I've made it public now): https://easyeda.com/TyeEasyEDA/Boomerang_Keyboard-a2d4e41a4fbf4da490f883c4b93fd55c There are 48 rectangular cutouts that I need to insert tiny programmable SK2812 LEDs in to. Each cutout also has 4 pads around it to solder-glob the LED into place. Did I represent this cutout correctly? Can EasyEDA make this as shown on the board? (or is there a more correct way?) Thank you.