This is a well discussed and documented problem here in EasyEDA. Please see: [https://easyeda.com/forum/topic/Inconsistent-connection-to-pad-on-single-numbered-multi-padded-footprint-40071cd5cf5a478cac7be7d4334a02a1](https://easyeda.com/forum/topic/Inconsistent-connection-to-pad-on-single-numbered-multi-padded-footprint-40071cd5cf5a478cac7be7d4334a02a1)<br> <br> and follow all the links. This may help you understand the issues. I do not know if the issue identified in my bug report has been fixed.

@andyfierman Thank you very much. I will try to find a work-around.

@MiniMax, If you read the information that I suggested above you will find ways to deal with the issue, namely make both antenna pads the same number (1) and put a 0R link or part of a matching network in series with one end of the antenna track so that both ends an have the same netname. If you put the series element in the ground side of the antenna track then it avoids the problem that both ends could then end up shorted to any ground plane.