Can you give us more information about what happens when you try to export your work? What is it? A schematic? A PCB? A Module? Gerber files? What are you trying to export? PDF? PNG? SVG? Spice netlist? Protel/Altium netlist? PADS netlist? Free PCB netlist? Can you share a public file that exhibits this problem? Or share it privately with support? https://easyeda.com/Doc/Tutorial/share.htm#Sharing

https://easyeda.com/editor#id=!3bd0f34929434c80b3c4514e0399e6d8 Its a PCB

Not sure what the problem is yet but part of it is that you have created a PCB Module and not a PCB. They are very similar but a Module is a section of a PCB that is intended to be re-used whereas the PCB is a complete PCB design. (It is possible to convert a module back to a PCB simply by placing it into a blank PCB and then saving it as a PCB.) * There is clearly a problem however because you cannot print it and you cannot export it: ![enter image description here][1] You should be able to do both of these things. I have also tried one of my own (test) PCB Modules: I can export it but I cannot print it. Clicking on `Print` produces the same error message: ![enter image description here][2] Hopefully, support can find out a bit more for you. [1]: /editor/20161027/5811360c9c42d.png [2]: /editor/20161027/5811360c9c42d.png

Thanks, i have just do another and there is no problem.