Dear all,
I'm experimenting EasyEDA with a very simple circuit: the classic RC. I would like to see the transient when the capacitor charges. With an R of 1kOhm and a C of 1nF the charge time should be around 5us.. But any parameter I set, I only see a flat graph with V=5 and A=0. Why, what's wrong with schema? Another simulator report the correct curve.
https://easyeda.com/editor#id=s20YWTRdb9
Hi Omar_ita,
Welcome to EasyEDA.
Sorry but your schematic is not public so the link you have posted does not show anything.
Can you make it public? Please see:
https://easyeda.com/Doc/Tutorial/share.htm#Sharing
for help on this.
In the meanwhile, for help on setting up and running simulations in EasyEDA, please have a look at the EasyEDA Simulation eBook at:
https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub
In particular:
https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.2p2csry
https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.3fwokq0
https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.46r0co2
(The Google links above are to the original copy of the Simulation eBook which you can also find at:
https://easyeda.com/Doc/Simulation-eBook/
but the table of contents in the EasyEDA copy is broken and misses out some sections. We are working to fix it but in the meanwhile the copy published to the web from Google Drive works just as well.)