You need to use EasyEDA editor to create some projects before publishing
Solved Clearance, Track to GND Copper Region
331 2
Peter Sellers 7 months ago
Hi, As you find below I have some rules for tracks. For track VIN the rule is 0,7 mm to everything else unless another tracks rule have higher demand. So I need 0,7 mm from VIN to GND, but this rule is not working since GND is a copper region. Then I tried to put the rule on the GND copper region, but then this rule will apply to all other tracks. So @support please help with a solution for this. Thank you. BR Peter <br> <br> <br> ![image.png](//
haidy_easyeda 6 months ago
Hello, if you need to uniformly modify the distance between the wire and the copper paving, you can modify it in the design here. It should be noted that this rule should be set as the default, so that this rule can be used. ![image.png](// ![image.png](//
Peter Sellers 6 months ago
Hi Haidy, you are right. The below example is good to keep in mind. ![image.png](// ![image.png](//
Login or Register to add a comment
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice