![saibot26031998](https://easyeda.com/images/avatar-default.png)
Ground Pour not connection to GND pads
posted by saibot26031998 ,
7 months ago.
replied by haidy_easyeda ,
7 months ago.
![bitterandreal](https://easyeda.com/images/avatar-default.png)
When moving component on PCB layout traces do not stick to component
posted by bitterandreal ,
7 months ago.
replied by haidy_easyeda ,
7 months ago.
![Bård Hansen](https://lh3.googleusercontent.com/-ogrm2uTMOGA/AAAAAAAAAAI/AAAAAAAAAF4/SXNQ8Mo5YM8/s50/photo.jpg)
Design rule Auto Routing certain Net Via directly to power and ground planes
posted by Bård Hansen ,
8 months ago.
replied by haidy_easyeda ,
8 months ago.
How does the reuse module feature work?
posted by Senor Blasto ,
8 months ago.
replied by haidy_easyeda ,
8 months ago.
![fengqin](https://easyeda.com/images/avatar-default.png)
can't export thr 3d stp file after a update of easyeda pro
posted by fengqin ,
8 months ago.
replied by haidy_easyeda ,
3 months ago.
![Jizhou](https://easyeda.com/images/avatar-default.png)
How to cut slot at the edge of the PCB ?
posted by Jizhou ,
8 months ago.
replied by haidy_easyeda ,
8 months ago.
![Calum22](https://lh5.googleusercontent.com/-eLrG7arD6_0/AAAAAAAAAAI/AAAAAAAAAAA/ABtNlbCIV-6KShZE8gEk4GV_TQ39evreww/mo/photo.jpg)
How to DRC/set minimum solder mask to copper area?
posted by Calum22 ,
9 months ago.
replied by haidy_easyeda ,
9 months ago.
![kesztio](https://easyeda.com/images/avatar-default.png)
No more Intersection, Substraction etc. menu items in Edit menu anymore? Where should I find them in EasyEDA Pro 2.0.x?
posted by kesztio ,
9 months ago.
replied by haidy_easyeda ,
9 months ago.
3D Not rendering after import from STD
posted by Thijs Franssen ,
9 months ago.
replied by UserSupport ,
9 months ago.
![Calum22](https://lh5.googleusercontent.com/-eLrG7arD6_0/AAAAAAAAAAI/AAAAAAAAAAA/ABtNlbCIV-6KShZE8gEk4GV_TQ39evreww/mo/photo.jpg)
How to connect two copper pours of same net together?
posted by Calum22 ,
9 months ago.
replied by andyfierman ,
9 months ago.
![Richard Kloubsky](https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg)
SQLITE_CANTOPEN: unable to open database file
posted by Richard Kloubsky ,
9 months ago.
replied by Richard Kloubsky ,
9 months ago.
![lycosaurus](https://easyeda.com/images/avatar-default.png)
Componets end up being off-grid
posted by lycosaurus ,
9 months ago.
replied by lycosaurus ,
9 months ago.
![alindsay24](https://easyeda.com/images/avatar-default.png)
Export 3D file (.STEP) when devices have custom 3D models
posted by alindsay24 ,
10 months ago.
replied by haidy_easyeda ,
9 months ago.
![Anikarijit](https://easyeda.com/images/avatar-default.png)
I can not select the overlapped objects or trace separately.
posted by Anikarijit ,
10 months ago.
replied by haidy_easyeda ,
10 months ago.
![Anikarijit](https://easyeda.com/images/avatar-default.png)
Can not be selected when the objects are overlapped on easyEDA pro
posted by Anikarijit ,
10 months ago.
![Peter Sellers](https://lh6.googleusercontent.com/-5yAMZ2tNcdg/AAAAAAAAAAI/AAAAAAAAAAA/AMZuuckrWQyB4LmCUExMp1hsEed74Mdw5g/s50/photo.jpg)
Solved Strange ratline - error 40
posted by Peter Sellers ,
10 months ago.
replied by Peter Sellers ,
10 months ago.
![AustinDale](https://easyeda.com/images/avatar-default.png)
Copper Pour Track Clearance EasyEDA Pro
posted by AustinDale ,
10 months ago.
replied by AustinDale ,
10 months ago.
![Diego Croatto](https://lh4.googleusercontent.com/-qBYC2oclxFc/AAAAAAAAAAI/AAAAAAAAA0k/c8wtJrAMdXc/photo.jpg)
Errors exporting to PDF
posted by Diego Croatto ,
10 months ago.
replied by haidy_easyeda ,
10 months ago.
FreeRouter (SES) file import not working
posted by Matt Clarkson ,
10 months ago.
replied by Matt Clarkson ,
10 months ago.
Update reuse block [EasyEDA Pro]
posted by Guilherme Fuzato ,
11 months ago.
replied by tokyodave ,
2 days ago.
![woodlabceti](https://easyeda.com/images/avatar-default.png)
Wire not following footprint when it is moved
posted by woodlabceti ,
11 months ago.
replied by woodlabceti ,
11 months ago.
![Calum22](https://lh5.googleusercontent.com/-eLrG7arD6_0/AAAAAAAAAAI/AAAAAAAAAAA/ABtNlbCIV-6KShZE8gEk4GV_TQ39evreww/mo/photo.jpg)
How to v-score boards when not panelising for JLCPCB assembly with easyedapro
posted by Calum22 ,
11 months ago.
replied by andyfierman ,
11 months ago.