Hello, I'm having a bit of a strange error.  When i drop the footprint for [C319148](https://lcsc.com/product-detail/USB-Connectors_XKB-Connectivity-U262-161N-4BVC11_C319148.html) in my project, it gives a DRC error for the alignment pin and pad being too close together. It's giving me a DRC Clearance issue between the ground pads and the hole.  The part that makes me wonder if i'm doing something wrong, is the error is coming from the supplied component itself.  i was wondering if anyone has any insight on this or what i can do to get around it.  I'm using the stock 0.152mm clearance requirements (as i am unsure if changing it will cause issues with the pcb production).