Hi, 1\. if your project is allowing to share with public\, please make it public\. [https://docs.easyeda.com/en/Introduction/Share-to-Public/index.html](https://docs.easyeda.com/en/Introduction/Share-to-Public/index.html) 2\. if you don't want to make your project public please download your project and send to [support@easyeda.com](mailto:support@easyeda.com). [https://docs.easyeda.com/en/Introduction/Basic-Skill/index.html#Saving-Your-Work-Locally](https://docs.easyeda.com/en/Introduction/Basic-Skill/index.html#Saving-Your-Work-Locally) we have a look. thanks

Hi Andrew, It's difficult to tell what the problem may be without sight of your project but section (4) of: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f) may help you identify what you are doing wrong.

@UserSupport Done :)

@andyfierman Thanks quite alot to work through there.

Hi I got you email, after check, that is because of J1 has the repeat pin number, when convert to PCB, all pin1 will only related with pad1. so you will not get the correct connection. you must fix J1 pin number, and then update to PCB. 

@UserSupport Yep that seems to be the issue, although I have no idea how that happened. I have changed them and it is working now :) Thanks for your help.