After updating to the latest version, I edited my old PCB layout and rebuilt a copper area to find out that there is some kind of inversion near cutout region. This is a link to the project https://easyeda.com/top29278/test_pcb_issue.
After updating to the latest version, I edited my old PCB layout and rebuilt a copper area to find out that there is some kind of inversion near cutout region. This is a link to the project https://easyeda.com/top29278/test_pcb_issue.
@top29278
Hi
We working on it, will try to fix it at next release.
at present , please use the copper area(fill type: None) rather than solid region(cut out), to avoid this issue.
Thanks
1. Draw a copper area which is fill stype as None, and change the Net to a special name different with others.
2.Open the Copper Area Manager via: Topbar - Tools - Copper
3.Move this copper area up to top
4.Apply
@UserSupport,
Both workaround and v5.7.24 resolve this issue. Thank you!
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
Hi
This issue will be fixed at v5.8, it only appears at bottom layer.
have you placed a footprint which is contain a cutout solid region?