I am working on panelized PCB with size 1x7. Each board has its own ground net. I want to apply copper area to each board for 2 reasons: common ground and copper region for Vcc signal. However, when I apply copper area to each board with corresponding ground net and Vcc signal net, I have following outcome. Copper are does not respond and fill the area.  As it can be seen, only the left-most board responds as I expected.  I arranged copper area manager for pouring Vcc copper first then corresponding ground and applied same procedure for each board.  I am willing to share the link of the project but it seems private. So I can add people willing to see more as members to the project. Thanks for your help.  This is what I see when 3D view is enabled.