I have a feeling the 'bad' pad is a "hole" ... between the two partial arc icons, and the hand icon, rather than a 'pad' ... next to the wire icon.

I have a feeling the 'bad' pad is a "hole" ... between the two partial arc icons, and the hand icon, rather than a 'pad' ... next to the wire icon.

@stanislav.ganna, It's easy: all you do is place one big Top Layer pad and then place other Multilayer (with plated through holes) pads on top of it and assign the same pad number to all of them. If you want a big pad on the Bottom layer too then copy and paste the big Top Layer pad then change it's Layer to the Bottom Layer, assign it the same pad number and then re-centre it using the XY coordinates. See also: [https://easyeda.com/forum/topic/How-to-place-multiple-vias-in-a-PCB-footprint-a34cf68d58414138898a56de60abd8c1](https://easyeda.com/forum/topic/How-to-place-multiple-vias-in-a-PCB-footprint-a34cf68d58414138898a56de60abd8c1) [https://easyeda.com/forum/topic/How-to-avoid-DRC-errors-when-connecting-to-PCB-Footprints-a-k-a-PCB-Libs-90bf944fe3644b21a7d27a9e9d8df8d6](https://easyeda.com/forum/topic/How-to-avoid-DRC-errors-when-connecting-to-PCB-Footprints-a-k-a-PCB-Libs-90bf944fe3644b21a7d27a9e9d8df8d6)

@andyfierman Thaks. I tried to do like you told me. Can you see please if its right like that: [https://easyeda.com/component/b2a1a9d1a76942d3ad317135d21a8782](https://easyeda.com/component/b2a1a9d1a76942d3ad317135d21a8782) But on my first version, I dont understand the final result. I made **1 Big Multilayer pad**, and put on it **3 small Multilayers pads**. So logically at the end I should have all transversals holes (with metal), but I get only one **with metal****into the hole** ( the big). And the other 3 do not have metal in holes. I'am afraid to have the same result after all.  Here is sample what I would like to have: 


I am more puzzled about why any of the holes in your pads are plated because you have set the **Plated** attribute to **No** in all 8 multilayer pads! 

@andyfierman Oh my god ! Thats why ! I didn't see that. Thank you very much ;)