Please help us to help you by reading: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)<br> <br> including the documents that it links to, especially the Tutorial. * Your post is unclear about whether you are soldering the tabs to the board as well as soldering wires to the tabs;  * You have given no information about the relay that you are using so there's no way to tell if there's already a Footprint avaliable for it;  * Your project is private so only you can see it so it is not possible to tell if you are creating your PCB by conversion from a schematic or directly in the PCB Edito (which we do not recommend) and hence how best to answer your question; In general you can create slotted pads: [https://docs.easyeda.com/en/PCB/PCB-Tools/index.html#Pad](https://docs.easyeda.com/en/PCB/PCB-Tools/index.html#Pad)<br> <br> <br> <br>