Forum - EasyEDA - An Easier Electronic Circuit Design Experience

Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss

Schematic PCB Simulation Skill Extension Feature Requests Bug Reports

DB9 (Female)

3169 19

Jleith 9 years ago

Hi All I'm having a terrible time getting my Schematic to copy to a PCB. I can't find the correct DB9F for the schematic for a PCB mounter DB9. Here is what I'm getting and can't find the correct schematic image. ![enter image description here][1] [1]: /editor/20150903/55e7cd1fbf8c0.jpg John

Comments

andyfierman 9 years ago

If you can't find one in the library allready, maybe you could build your own PCB symbol and save it to **My Parts**: > https://easyeda.com/Doc/Tutorial/PCBLib.htm#CreatingThePCBLibs If you are really stuck, can you upload a photo or a catalogue reference to the DB9 part that you have?

dillon 9 years ago

what about this https://easyeda.com/component/DB9-4EyQ82kCT ?

andyfierman 9 years ago

I think the pin rows are like Johns left hand footprint and not how he needs them to be in the footprint on the right.

andyfierman 9 years ago

John, Are you *sure* this is a 90 degree through hole PCB mount female 9 way D-type connector? I can't find anyone selling one with the pinout you have in your right hand image. :)

Jleith 9 years ago

Hi Andy and Dillon The Female DB9 is one I have used before. It fits into the PCB directly. Here is a real picture of it ![enter image description here][1] [1]: /editor/20150904/55e8ef4d8455a.jpg

Jleith 9 years ago

Now re looking at the picture maybe I have it positioned wrong on my PCB ?? On the PCB image the "C1" label should be facing the outside and projecting beyond the PCB edge. I tried to find another members board with a DB9 but no luck. I just have to have the mounting holes on the PCB. Fellows is my revised think cap correct. John

dillon 9 years ago

It is easy to place a oval mount holes. place three round pads tothger. ![enter image description here][1] [1]: /editor/20150904/55e8f1e931870.png

Jleith 9 years ago

Dillon The "Hole" tool on the PCB is that a drilled out mounting hole ? When I look at the PCB Gerber file I don't see the "Hole" as a drilled out? John

dillon 9 years ago

THe hole has a very small ring, maybe not drilled out.

Jleith 9 years ago

Hi Dillon I did some measurements and the "Hole" is a 80 mil and for a 3 mm screw for mounting to standoffs I have changed it to 115 mil hole. Now if I look at the "Photo" it looks like a "Black" hole image. I will have to wait for the board to be made and see if it s "Real Drilled out Hole" if not I have room to drill it out. John

dillon 9 years ago

Hi, Just check it again. The hole on the toolbar, no ring. it is a real hole.

Jleith 9 years ago

Excellent I'm on the correct path. The project has come full circle and I 'm very happy. Now I just have to see what the final PCB looks like when it arrives. John

dillon 9 years ago

Hope you like to try to order your PCB from EasyEDA. It is nice. Dillon

Jleith 9 years ago

Yes I have a board out for publication and I hope it will be here soon.I want to see how it turns out before I send in my next PCB. It was sent thru EasyEDa on Aug 24th. I have not hear how the board is proceeding. 8 business days. They say 4 - 5 days but delivery my be the hangup. I will post when it arrives. Dillon how many boards have you had done ? John

dillon 9 years ago

Hi, Your PCB have sent a few days ago, you can track them via http://www.17track.net/en/result/post.shtml?nums=RF347658734SG We have shipped lots of PCB, don't know how many. As far as now, Every one like our service. https://easyeda.com/forum/topic/Whos_ordered_PCBs-L71VduMGY http://hackaday.com/2015/08/21/a-tale-of-two-browser-pcb-tools/

andyfierman 9 years ago

John, For info: I don't think you actually need oval mounting holes for your connector. It has two through-hole solder mountings that will be to clip into circular holes. The connector seems to have the option of mountinh it using fixing screws through the slots nearer the front of the connector but that is optional. :)

Jleith 9 years ago

Hi Dillon Were did you get this number for my PCB ( RF347658734SG ) ?? I really don't have any documents on my Order other then Paypal receipt. John

Jleith 9 years ago

Hi Dillon I just was reading a post indicating that I should receive an email with a picture of my PCB and details on the shipping. The order was placed Aug 24th. John

dillon 9 years ago

Maybe the email sendin service has some problems, so just need to waiting for some time to receive your PCBs.

你现在访问的是EasyEDA海外版，建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice

Unleash creativity, start design now.

Cookie Notice