Ah so... If you need to view the project, let me know so I can add you as a team member. It's not allowing me to make it public. Thanks!

*Issue solved!

@naveysookoo ``` I have the same problem with a design. gives me the DRC errors. Your help would be very important. ```

@saul.sg527, Before asking for help please read: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a) and give enough information about your question tol help others to help you.

@saul.sg527 Hello Please to make a screen-shot for the error that you've got so we could better help you to solve the problem. Make sure that you have checked your Design rules before moving forward, check the distances between tracks it should match the spacing design rules. Really hard to provide guidance when there is no enough information about the issue.

I am getting DRC clearance error. If anyone can help me to solve this issue.

Sorty but your screenshot does not hive enough information. Can you make your project public and post the url to it back here? Maybe try setting the PCB canvas units to "mil" then run DRC again?

Hi! @naveysookoo @Kunjal2894 Nowaday making project public has been made awfully too complex. Instead of pressing the public dot and choosing the publication format and pressing save, now it takes us to this new page by giving us a notice "A new page called OSHWLAB.COM will open, where you can complete and share the project. Do you continue?" There you need to fill almost every field and then you can press "Publish and share" If they ask me, this feature should have never been implemented, confuses waaay tooo many people! Please, revert back to making it easy to make your project public! Well, now I have ranted enough. See you! -Markus

@Kunjal2894 Your DRC error might bee caused because your trace starts diagonally instead of starting to straight to left. Thus diagonal trace is too close to the next pin causing a clearance violation.  Regards, Markus Virtanen HW / Electronics Designer