I'm trying to create half a NE5532

Everything is fine until I paste the spice subckt into the "Edit subckt" window. I get the popup message that it is updated but when I go back in the text box is once again blank.

Any ideas why it won't accept the subckt?

FYI this is the model (just the standard one from TI I think)

***** NE5532 Source: Texas Instruments NE5534

• C2 added to simulate compensated frequency response (Uwe Beis)

• NE5532 OPERATIONAL AMPLIFIER "MACROMODEL" SUBCIRCUIT

• CREATED USING NE5534 model from Texas InstrumentsAT 12:41

• (REV N/A) SUPPLY VOLTAGE: +/-15V

• CONNECTIONS: NON-INVERTING INPUT

• | INVERTING INPUT

• | | POSITIVE POWER SUPPLY

• | | | NEGATIVE POWER SUPPLY

• | | | | OUTPUT

• | | | | |
  .SUBCKT NE5532 1 2 3 4 5

• C1 11 12 7.703E-12
  C2 6 7 23.500E-12
  DC 5 53 DX
  DE 54 5 DX
  DLP 90 91 DX
  DLN 92 90 DX
  DP 4 3 DX
  EGND 99 0 POLY(2) (3,0) (4,0) 0 .5 .5
  FB 7 99 POLY(5) VB VC VE VLP VLN 0 2.893E6 -3E6 3E6 3E6 -3E6
  GA 6 0 11 12 1.382E-3
  GCM 0 6 10 99 13.82E-9
  IEE 10 4 DC 133.0E-6
  HLIM 90 0 VLIM 1K
  Q1 11 2 13 QX
  Q2 12 1 14 QX
  R2 6 9 100.0E3
  RC1 3 11 723.3
  RC2 3 12 723.3
  RE1 13 10 329
  RE2 14 10 329
  REE 10 99 1.504E6
  RO1 8 5 50
  RO2 7 99 25
  RP 3 4 7.757E3
  VB 9 0 DC 0
  VC 3 53 DC 2.700
  VE 54 4 DC 2.700
  VLIM 7 8 DC 0
  VLP 91 0 DC 38
  VLN 0 92 DC 38
  .MODEL DX D(IS=800.0E-18)
  .MODEL QX NPN(IS=800.0E-18 BF=132)
  .ENDS