Home>Forum>Topic
Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss
Schematic PCB Simulation Skill Extension Feature Requests Bug Reports
You need to use EasyEDA editor to create some projects before publishing
Downloading Local Auto Router
877 9
hokpinsStudent 2 years ago
Can someone help me install the local auto router onto my Mac. I tried following the instructions posted by Easy EDA, but they don't seem to be working. After I download the zip file , I open the terminal, go to the directory where mac64.sh file is located and try to put in the command sh mac64.sh, but I keep getting the following error: MacBook-99:~ hopkinsStudent$ sh /Users/hopkinsStudent/Desktop/easyeda-router-mac-x64-v0.8.11/mac64.sh chmod: jre/mac64/bin/java: No such file or directory /Users/hopkinsStudent/Desktop/easyeda-router-mac-x64-v0.8.11/mac64.sh: line 5: log/router.log: No such file or directory
Comments
andyfierman 2 years ago
"After I download the zip file , I open the terminal, go to the directory where mac64.sh file is located..." To be clear: have you unzipped the file into a directory?
Reply
andyfierman 2 years ago
Try: 1. navigating to the target directory;  2. then opening the terminal in the target directory;  3. then entering; sh mac64.sh at the command line.
Reply
hokpinsStudent 2 years ago
It keeps saying No Such file in directory. See below. Any other suggestions? macbook:~ hopkinsStudent$ /Users/hopkinsStudent/Desktop/easyeda-router-mac-x64-v0.8.11 -bash: /Users/hopkinsStudent/Desktop/easyeda-router-mac-x64-v0.8.11: is a directory macbook:~ hopkinsStudent$ sh mac64.sh sh: mac64.sh: No such file or directory
Reply
andyfierman 2 years ago
What happens if you run the command as root?
Reply
hokpinsStudent 2 years ago
Nothing doing. Are the commands  I'm putting into the terminal I posted up above correct?
Reply
andyfierman 2 years ago
@hokpinsStudent, The process and commands should be pretty much the same as on linux but I don't have a Mac so I can't be sure. Can you post a screenshot or listing of the terminal commands from when you unzip the archive? Have you tried emailing support @ easyeda.com directly? Your problem is not specifically an EasyEDA problem so you could also try asking on a Mac user's forum.
Reply
andyfierman 2 years ago
@UserSupport, I can't work out what this user might be doing wrong, could you help with this?
Reply
hokpinsStudent 2 years ago
Thank you for the help. I figure it out - I was operating the in the wrong directory. It now works as it should. It would be helpful if EasyEDA posted a step-by-step video on their website both for windows and mac as they are slightly different. I used this vidoe which helped quite a bit: [https://www.youtube.com/watch?v=CQSbtptqBY8](https://www.youtube.com/watch?v=CQSbtptqBY8)
Reply
andyfierman 2 years ago
@hokpinsStudent, Having found that the installation and running instructions may be a bit confusing and, from tour most recent post, now managed to successfully install and run the autorouter dare I say that you are now prime candidate for writing a short "How to install the autorouter on a Mac" topic and posting it in the Tips and Skill category. You could also produce a video and link to it from the topic. It's just one of the things that help to turn a Forum into a Community. :)
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版，建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice