Sorry but the short answer is no. The long answer is still no but the description to get there is much longer and is basically because EDA tools just do not work that way. They are not drawing tools or artwork tools.

You can draw tracks with varying widths but not in the flowing way of your photo.

Ok clear. Is there a way to import an image in SVG and convert to a "copper area"?

Whilst you can import an image as a copper layer: [https://docs.easyeda.com/en/Import/Import-Image/index.html](https://docs.easyeda.com/en/Import/Import-Image/index.html) as far as getting a useable PCB out of it goes, in practice the answer is still no but for different reasons. [https://easyeda.com/forum/topic/Insert-PCB-as-Image-to-PCB-b26e11571c184ced9e5865e716fbc660](https://easyeda.com/forum/topic/Insert-PCB-as-Image-to-PCB-b26e11571c184ced9e5865e716fbc660) [https://easyeda.com/forum/topic/inport-picture-0e79635f194b4bd6a63ab241542180fa](https://easyeda.com/forum/topic/inport-picture-0e79635f194b4bd6a63ab241542180fa) [https://easyeda.com/forum/topic/Copying-an-existing-board-shape-f9239583761e46b689b851d840503098](https://easyeda.com/forum/topic/Copying-an-existing-board-shape-f9239583761e46b689b851d840503098) [https://easyeda.com/forum/topic/Using-a-jpeg-image-to-create-a-PCB-d6bbca9bf9ed4a1899e29f73e5a97db2](https://easyeda.com/forum/topic/Using-a-jpeg-image-to-create-a-PCB-d6bbca9bf9ed4a1899e29f73e5a97db2)

> Whilst you can import an image as a copper layer: > [https://docs.easyeda.com/en/Import/Import-Image/index.html](https://docs.easyeda.com/en/Import/Import-Image/index.html) However it remain an image object, not a real copper layer, right? This is important since I cannot any NET for an image... Thanks for the other links, I will read them.