This is a common feature request that the EasyEDA team continues to ignore and do nothing about. Here is the only workaround that I currently found: Create a new project, then place the component from the EasyEDA Standard user contributed library onto a sheet in that project. Save the project, then in EasyEDA Pro - convert it to an EasyEDA Pro project. Open that project, then edit the component. Save the component under your personal library. After that is done, the component can then be accessed in other projects. It's a very lengthy workaround and a big annoyance. I hope the feature of directly importing/using User Contributed parts/symbols from EasyEDA standard in the Pro Edition becomes a feature soon.

A helpful post that recently answered a similar query: 

Here's the link to the above topic: [https://easyeda.com/forum/topic/Do-EasyEDA-Std-and-EasyEDA-pro-share-the-same-user-contributed-library-7190851d27d741bf8c2b03823ee3ccf0](https://easyeda.com/forum/topic/Do-EasyEDA-Std-and-EasyEDA-pro-share-the-same-user-contributed-library-7190851d27d741bf8c2b03823ee3ccf0)

This is really surprising. The user contributed library is one of the reasons I use EasyEDA over other products. I can't believe they would remove this feature from their "pro" version.

@andrew_3060 Same here. Can't believe they are pushing and recommending the "pro" version when it lacks this.

Hello,We did not remove this feature in the Pro version.  the "User Contributed Libraries" in the Standard Edition are called "Public Libraries" in the Professional Edition. And it needs to be searched in the search panel to be displayed. It is important to note that User Contributed Libraries in Standard Edition and Public Libraries in Professional Edition are separate.

@haidy_easyeda I can't find Public LIbraries. (Shift+F)  but no public libraries.  no user contributes part found too

@ratthaninw only online editor has this entry

@haidy_easyeda These are not the same. Many parts are available in the standard easyeda user contributed library, but are not availale in "public" on easyeda pro.

<font _mstmutation="1">@kylegp </font>Hello, this is because the user contributed libraries in the Standard Edition are separate from the public libraries in the Professional Edition.<font _mstmutation="1"></font>