please refer this You need to configure the browser and execute the script first before click the **Auto Router** icon at editor. [https://docs.easyeda.com/en/PCB/Route/index.html#Local-Auto-Router](https://docs.easyeda.com/en/PCB/Route/index.html#Local-Auto-Router)

I've done that. I use Chrome and the above page says that Chrome doesn't need to be configured. Is there a setting somewhere in Chrome that I actually do need to configure?

Please make sure your OS is 64bit. if you still can't use the Auto router, please try another PCB, if only this one PCB can't run it, please share your project [https://docs.easyeda.com/en/Share/Share-to-Public/index.html](https://docs.easyeda.com/en/Share/Share-to-Public/index.html) I will help to check

OS is Windows 10 1803 64-Bit. I tried another PCB, and got the same thing: 2018-06-10 20:15:47.980:INFO::main: Logging initialized @292ms 2018-06-10 20:15:48.060:INFO:oejs.Server:main: jetty-9.2.22.v20170606 2018-06-10 20:15:52.161:INFO:oejs.ServerConnector:main: Started ServerConnector@6979e8cb{HTTP/1.1}{127.0.0.1:3579} 2018-06-10 20:15:52.162:INFO:oejs.Server:main: Started @4476ms 2018-06-10 20:15:54.809:WARN:oejh.HttpParser:qtp769287236-19: Illegal character 0x16 in state=START for buffer HeapByteBuffer@595b58c0[p=1,l=175,c=8192,r=174]={\x16>\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00...\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00} 2018-06-10 20:15:54.813:WARN:oejh.HttpParser:qtp769287236-19: badMessage: 400 Illegal character 0x16 for HttpChannelOverHttp@619f8bc4{r=0,c=false,a=IDLE,uri=} I even run the batch file as admin and still get the errors. Check out using this project: [https://easyeda\.com/korishantalshin/Home\_Energy\_Monitor](https://easyeda.com/korishantalshin/Home_Energy_Monitor)

I have tried your PCB, it was complete quickly via auto router.

I didn't say there was anything wrong with the PCB design/project. I had no doubt that that would work just fine. My problem is the Local Autoroute Server is not working properly. Is there a setting in Chrome that must be set? Is there something I need to change in the autoroute config? I decided to make a screen capture of the progress and show the log file during the event. [https://youtu.be/Lpu4tE6sE2I](https://youtu.be/Lpu4tE6sE2I) Notes in video: Video showing EasyEDA Local Autorouter problem First autoroute without the local running. At 0:02 I open the Autoroute window. In about 2 seconds the "Local" option goes 'Unavailable' because it tried to the local and didn't find it loaded yet. Then I load the local autoroute program. At 0:20 I start the local autoroute in the cmd window and show the successful loading by viewing the log file at 0:31. I then proceed to try the autoroute window again at 0:44. At 0:45 the window already says the 'Local' option is unavailable. So it did try to communicate with the local server. At 0:53 I show the log showing the error message that was generated from the client attempting to communicate with the server. So, with this video, can anyone tell me what's wrong? I get no other error message from Windows, Firewall, or Chrome. I have even disabled my anti-virus/anti-malware just in case.

auto router loading upto 95 percentage then it shows due to concurrent multiple process unable complete and try again

@prabhakaran.govindaraj, This is an old thread and the autorouter has been updated: [https://image.easyeda.com/files/EasyEDA-Router-v0.7.7z](https://image.easyeda.com/files/EasyEDA-Router-v0.7.7z) [https://image.easyeda.com/files/EasyEDA-Router-v0.7.zip](https://image.easyeda.com/files/EasyEDA-Router-v0.7.zip) Please try the new autorouter and if you still have problems, please post a new Bug Report.

Downloaded the latest version. Seems to work so far  :) Thanks for the heads up, as I didn't realize there was a new version available. Thanks.