I added a few new components to my pcb layout today. I then exported to "easyeda" json format. The new components with new nets did not show up in the json file.
In order to get them to add to the json i had to run the autorouter first, then cancel it.
Expected result:
If I add new components with new nets, then those nets should export into easyeda format without having to run autorouter first.
Your project is private so only you can see it.
Are you following the Design Flow recommended in the Tutorial or is this a PCB designed directly in the PCB Editor i.e. without a schematic?
@andyfierman Yes, I saved it several times.
The PCB is designed using the Easyeda software starting with schematic first, then sending to "Convert to PCB".
However adding a new item in the schematic, and importing changes into the PCB, then exporting to easyeda json format does not export the new nets from the schematic.
Hi
You need to add net for PAD of package at PCB manually
try Find Similar Objects and change them all the time
The net is added to the pad when import changes is run. You can clearly see the net name exists in the nets list in easyeda.
I just created a test project with the above mentioned issue and I am able to reproduce it.
If you export that project to "EasyEda" json, "nets": [] is missing from the json file but everything else is there.
But if you run the autorouter, then export it, nets are in the json file. I shouldn't need to run the autorouter first to add nets to the json file....
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
Did you save the modified file before you exported it?