You need to use EasyEDA editor to create some projects before publishing
Electrolitic capacitor - schematic vs PCB
1313 8
szafran 7 years ago
Hello, in my opinion there is a bug. When placing electrolitic cap on schematic and next converting to a PCB, the "+" pad (one with small "+" on silk layer) is allways connected to GND. Assuming - electrolitic caps are connected in oposite direction comparing schamatic to PCB in same project. Please check it out.
Comments
andyfierman 7 years ago
Hi Szafran, Can you post a public project to illustrate this? Thanks.
Reply
szafran 7 years ago
Sure, here you are: https://easyeda.com/szafran/caps_test-e9411ed27bb047a88f9b1684a4f5f76c name of the project - caps test Notice that this bug is only in "EU" versions, cause in US there is a mark on "-" side.
Reply
andyfierman 7 years ago
This is not a bug with the EU symbols. It is a bug with the RAD-248 package pin numbering. The default package for the EasyEDA Libs EU electrolytic caps is the same as for the US symbols: CP_8X13MM The package you have for the US caps in your test example is also: CP_8X13MM but the package you have assigned for the EU electrolytic symbols is: RAD-248 and the problem is with the pin mapping of this package. * The package pins on the RAD-248 package need to be swapped. It can be worked around by selecting the symbol in the schematic and pressing `I` and then editing the PCB pin numbering but **the user should not have to do this with this type of package**. Thanks for your report.
Reply
szafran 7 years ago
I think all of the "RAD" packages have this issue. Look now, i changed few packages in EU caps and still the same. Will you do something about those bugs? Thanks
Reply
andyfierman 7 years ago
I have raised a specific Bug Report to get this fixed: https://easyeda.com/forum/topic/Reversed_pins_on_RAD_series_electrolytic_cap_footprints-jhb5nFXe8
Reply
szafran 7 years ago
Ok, thanks. It can be dangerous in some cases - you know what I mean. Thanks!
Reply
thomas.kilian.0815 6 years ago
This is still not fixed. I noticed it after soldering 4 capacitors :-(
Reply
EasyEDA 6 years ago
This has now been corrected. Please see: https://easyeda.com/forum/topic/Electrolitic_capacitor_schematic_vs_PCB-Cc5nFlf9r
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice