You can edit the pin or pad number information to make the schematic symbol pins map correctly onto the pads on the PCB Footprint.

In this particular case this is because the PCB Footprint has been incorrectly constructed and checked by the user contributor. All the right hand side pads have been set to number 20:  Suggest that you: 1. clone the **second** symbol/footprint pair;  2. add a description in the Description field;  3. make sure the link to the [device datasheet](https://nimbelink.com/Documentation/Skywire/3G_HSPA/30026_NL-SW-HSPA_Datasheet.pdf) is included in your cloned copy;  4. edit the right hand side pad numbering to correct it;  5. check the pin and pad numbering for the symbol and the footprint;  6. check and if necessary the accuracy of all dimensions against the datasheet. 7. Save it. 8. submit an error report for **both** pairs of the symbols **and** footprints contributed by user **mehfoos**, explaining the error and requesting that they are deleted from the library because both pairs are wrong;