Your crystal symbol is a non-simulation symbol. Therefore it has no simulation model associated with it. Please see: https://easyeda.com/forum/topic/How_to_find_simulatable_parts_in_EasyEDA-1YgasK2kC and choose the crystal model as described in there. You will also have to set the crystal parameters in the right hand panel from the crystal manufacturer's datasheet.

Your lamp, L1, also has no simulation model associated with it. You'll find both your crystal and lamp models under: **System Components > Spice Simulation > Spice Miscellaneous** * The Crystal component is a models of a quartz crystal. It does not represent a crystal oscillator. If you are wanting to make a clock oscillator then the cystal will need some extra components around it to turn it into an oscillator

Thank you for your help. I have used the component in "Spice Miscellaneous", and it's work. (There is no problem with lamp, i have select it in "More Libraries...") What do you advise me about extra components for make a clock oscillator ?

`What do you advise me about extra components for make a clock oscillator ?` You need to look around the web for information about crystal oscillator design. If you are using a crystal with a device with a built-in oscillator circuit then look at the device datasheet and apps notes.