from the LM56 model example
the graph result is wrong from the actual TI datasheet.
outputs should go LOW when the temperature exceeds Temp1 or 2, not HIGH.
the result from the example is opposite. Can you modify the example please?
or how can I see the subsckt text of the existing module?
I don't have LM56's spice model library. How can I get the model library from the EasyDEA model?
Oops!
Thanks for pointing that out. I must have had a bad model testing day.
** The LM56EE spice subcircuit model is now fixed. **
https://easyeda.com/project_view_The-EasyEDA-LM56-model_YWQ8qkCUc.htm
How to view all .model and .subckt defined spice models used in a simulation:
Save the schematic;
Super Menu > Miscellaneous > Netlist for Document > Spice...
The netlist can then be copied and pasted into any text editor.
To run simulations with a pasted-in netlist:
https://easyeda.com/editor#id=Ev5rpnJG2
https://easyeda.com/editor#id=NnhztL2kC
https://easyeda.com/editor#id=808qkCTN5
https://easyeda.com/editor#id=sHBTNtZhz
https://easyeda.com/editor#id=6icuoGYga|X9rlDUcuM|qiu4fBb9l