Hi,
I want to place a fiducial in my PCB
I use a round pad with 0.75mm diameter. A solder mask with 0.375mm and a paste mask with -0.375mm
So I have a fiducial with d=0.75 and the solder mask is 2 x d and without paste mask on the pad.
But I have a full copper area on the PCB, and the upper area has a clearance of 0.15mm so the copper area is to close to my fiducial.
How can I remove the copper from the copper area around of 2 x d from my fiducial?![copper - soldermask.jpg](//image.easyeda.com/pullimage/cVCZG00EakrzFfH87t8Ytbuf9tzuyA0nGrfsvPQv.jpeg)
You can see in the example.
paste mask= red
soldermask = light green
![top_layer.jpg](//image.easyeda.com/pullimage/CTfEtxFyXHy27hDM8UPPzal0se3Y9MGySMhzsDDW.jpeg)
and here is the top layer my copper area...
Hope you can help me.
thanks in advance