You need to use EasyEDA editor to create some projects before publishing
Filleting of traces
1167 8
vikhattangady 4 years ago
Is it possible to create fillets on the inside and outside of traces? I would like to use a milling machine to mill the design, and it would help to set the fillet radius of the traces to the radius of the milling bit so that I can know where the bit can reach and where it cannot.
Comments
andyfierman 4 years ago
Can you post an image to illustrate your question?
Reply
vikhattangady 4 years ago
![CNC Machining Design Tip: Optimizing Internal Corner Radii](https://d2njopo061ehj4.cloudfront.net/images/blog/20160411-optimizinginternalcornerradii/20160411-optimizinginternalcornerradii-img01.png?mtime=20161209180704) Hopefully this image does justice. If you look at the top left corner, even with the milling bit taking a sharp turn, the trace will have a fillet. The bigger the bit, the bigger the fillet. Would like to see these fillets in the design if possible to check the viability of using that size of bit. Idea is to reduce the number of bits so that I can make (for example) drills and traces with same bit. The trinity would be Holes, Traces and Outline cut with a single bit.
Reply
JLCPCBsupport 4 years ago
Hello ; Regarding your first post, it all depends on your machine's micro-stepping and repeatability. Still not clear your request but it seems that you are willing to produce your own design, you need to export the PCB design as PNG with a x1 scale size and a "white on black" color, the machine will perform the milling on the black areas to leave the white traces related to your design. Maybe you already know all of what I mentioned, so please to explain more.
Reply
vikhattangady 4 years ago
@JLCPCBsupport Thanks for your response. For example, if I am using a 1mm milling bit to mill my pcb, the inside corner will be minimum 0.5mm radius fillet. If by chance I am using a 2mm milling bit (unrealistic, but just an example), then the fillet will be 1mm. I will not be able to make a tighter corner than that. Is there a way to see those fillets in the pcb design while working in easyEda?
Reply
andyfierman 4 years ago
@vikhattangady, "Is it possible to create fillets on the inside and outside of traces?" What you are asking is not called "filletting" it is "radiusing". So you are asking if it is possible to create traces that have radiused bends. Please read the Tutorial, (2) in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a) The answer is yes: ![image.png](//image.easyeda.com/pullimage/8KfmzxsGohG2jt2y1jc7Sy3CJxqD03UQY4YOGkOh.png) The radius of the centre line of the arc is equal to the difference between the centres of the start and end points of the arc in either the X axis or the Y axis (because the arc is a quarter circle so the difference is the same in the X or Y axes). The radius of the inner arc = (the centre raius - half the trace width). The radius of the outer arc = (the centre raius + half the trace width).
Reply
andyfierman 4 years ago
The radius of the inner arc = (the centre radius - half the trace width). The radius of the outer arc = (the centre radius + half the trace width).
Reply
JLCPCBsupport 4 years ago
@vikhattangady Got it already, so as Andy mentioned about the traces you better select the arc feature and replace all the sharp angles. about the CNC stuff you better pickup the smallest milling bit you have to maintain the trace width.
Reply
vikhattangady 4 years ago
@andyfierman @JLCPCBsupport Thanks for the help
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice