Do you mean that the module is to be mounted upside down on the top layer or that it is to be mounted on the bottom layer of the board? Please post a sketch to illustrate exactly what you want to achieve.

I believe this question has already been answered in detail in your previous post on the same subject but for a different module: [https://easyeda.com/forum/topic/header-pins-for-wemos-d1-836a47f5d27042be970aba75f991504c](https://easyeda.com/forum/topic/header-pins-for-wemos-d1-836a47f5d27042be970aba75f991504c)

@andyfierman Yes - the module is to be mounted upside down on the top layer. I think I found a simpler way. I just placed the component on the bottom layer

@kgreene1983, As long as the module is connected to the PCB by through hole headers or connectors, that should work ok. You will of course have the silkscreen elements for the top layer mounted  module on the bottom layer of the PCB.

@andyfierman I found a model with the pin reversed which has sorted it.