There is no way in EasyEDA Std to link two nets with different names: they will always assume one name or the other. An element that works as a net-tie is available in EasyEDA Pro. This has been discussed many times in the forum. Just call them the same GND and change the track widths as required. See my earliest reply in: [https://easyeda.com/forum/topic/Solder-jumper-and-net-names-81964e711915464aa2e0794266c16795](https://easyeda.com/forum/topic/Solder-jumper-and-net-names-81964e711915464aa2e0794266c16795)<br> <br> and: [https://easyeda.com/forum/topic/Net-tie-a-copper-only-component-with-2-pads-to-split-nets-without-DRC-errors-and-multiple-netname-warnings-b6a099bf01bb4055b821ab398ee37b60](https://easyeda.com/forum/topic/Net-tie-a-copper-only-component-with-2-pads-to-split-nets-without-DRC-errors-and-multiple-netname-warnings-b6a099bf01bb4055b821ab398ee37b60)<br> <br>

Have been changing the widths of the same name track. Was just hopping there was an easier way. What is the element that works as a net-tie in EasyEDA Pro called? I'm try mad migrate my project

@kgreene1983, Try "Short Symbol":