VCC and GND have no PCB footprint associated with them because they are netlabels. You need to place two single connectors (or one 2 pin) in the schematic and assign a PCB Footprint to them (or it). The footprint can be an actual connector or just something that gives you two pads on the PCB that have holes big enough to take your battery wires. For more, please read 92.2) in (2) in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)

Thank you very much @andyfierman